Quarter-cut Sycamore veneer 0.3 mm x 100 x 16 cm

Tax included
201.222.01 O
30 Items

Quarter-cut Sycamore veneer 0.3 mm x 100 x 16 cm

Genuine wood sliced-veneer sheets.

Length: 100 cm.

Width: 16 cm.

Thickness: 0.3 mm.

Sold by the sheet.

Pictures herewith are photos of the product you will receive.

Warning: Please carefully read the full description below here.


Quarter-cut Sycamore veneer 0.3 mm x 100 x 16 cm

Genuine wood sliced-veneer sheets.


Length: 100 cm.

Width: 16 cm.

Thickness: 0.3 mm.

Measurement scaling:

Dimensions are measured at the small end.

- Width rounded to the covered centimeter: 15.8 giving 15 cm.
- Length rounded to 5 centimeters: 257 giving 255 cm.


The thickness of this veneer is particularly thin, twice thinner than the standard 0.6 mm thickness.

Slightly translucent, it is appreciated for realizations requiring transparency or wrapping complex shapes.

It can be sanded very lightly with dexterity.

The color of the substrate will influence the final shade of the wood.


Botanic name: Acer Pseudoplatanus.

The Sycamore maple, or the European maple, is a hardwood so-called "white," but its color is slightly ivory.

This forest species is one of the valuable hardwoods, especially in its fiddled form.

Sycamore is used in cabinetmaking and decoration; it is best known for its use in violin making, especially for its fiddled peculiarity.

This fiddled wood has a unique aestheticism and a much sought-after tone for violins and cellos.

Fiddled Sycamore is a rare and precious wood.

Product Description:

Genuine wood-sliced veneer sheets.

These veneers are raw without a finish or any fleece back.

The veneer surface is similar to plane wood. However, it will be preferable to forecast a light sanding after gluing.

The veneers are offered here as wood-sliced sheets of one and unique thickness.

Both faces of these veneers are the same, without fleece back or glue.

Even if the veneer's sides had been cut relatively straight, it isn't a precise parallel clipping; some veneers may have kept the decreasing shape of the tree, wider at the bottom end and narrower at the top end.

Very occasionally, some veneer's sides have traces of unclipped wane, but our veneers are measured at the narrowest, as explained in the paragraph "Dimensions."

As genuine natural wood, all finishing products are acceptable as long these products are meant to be for wood usage.

The choice of the finished product must be consistent with the final usage realization.


Pictures herewith are actual photos of the product you will receive.

For presentation, the veneer sheets may have been juxtaposed to give you a better idea of the final aspect after splicing; this is only a suggestion; display it as your wish.


Veneers are rolled and well protected in a strong cardboard box chosen for resisting somewhat vigorous handling and delivered to you in good condition.


Sold by the sheet, decreasing prices upon quantity.

More info:

Should you need more info, please get in touch with us either by e-mail or by telephone.

Look at our TUTORIALS, and you might find some valuable tips.

201.222.01 O
30 Items

Data sheet

Thickness group
Thin thickness
Width group
Standard width