Genuine wood sliced-veneer sheets.
Single selected veneers, no sequence.
Fix length of 30 cm long.
Width: From 15 to 17 cm.
Thickness: 0.6 mm.
Sold by the sheet.
Genuine wood-sliced veneer sheets.
Single selected veneers, no sequence.
Fix length of 30 cm long.
Width: From 15 to 17 cm.
Thickness: 0.6 mm.
Sold by the sheet.
The width is rounded to the covered centimeter, for example, 15.8 cm, giving 15 cm.
American Maple, Hard Maple, Sugar Maple, US Maple.
Acer Saccharum.
Native to North America, the United States, and Canada.
American maple is a hardwood with a creamy white color. It is sometimes dotted with sugar streaks, distinguishing it from the European sycamore.
American maple offers some rare veneer specialties such as:
Birdseye maple.
Curly maple or fiddleback / figured Maple.
Quilted maple.
Burl maple.
Its leaf is the one that inspired the Canadian flag.
Weight: 705 Kg / m3 average at 10 - 12% humidity.
Janka Hardness: 6450 Newton, for comparison: Oak is 4980 N and Poplar is 1650 N.
Modulus of elasticity: 12.62 GigaPascal, for comparison: Ash 12.31 GPa and Poplar 9.75 GPa.
Modulus of rupture: 109 MegaPascal, for comparison: Oak 97 MPa and Poplar 62 MPa.
Its wood is used both for furniture making and for the manufacture of skateboards and skis, as it offers a very appreciable resilience.
US maple is also used for the manufacture of musical instruments, such as guitars, basses, drums and keyboards. It is appreciated for its resonance and its ability to produce a clear and bright sound.
Genuine wood-sliced veneer sheets.
These veneers are raw without a finish or any fleece back.
The veneer surface is similar to plane wood. However, it will be preferable to forecast a light sanding after gluing.
The veneers are offered here as wood-sliced sheets of one and unique thickness.
Both faces of these veneers are the same, without fleece back, without glue.
Even if the veneer's sides had been cut relatively straight, it isn't a precise parallel clipping; some veneers may have kept the decreasing shape of the tree, wider at the bottom end and narrower at the top end.
Very occasionally, some veneers' sides have traces of unclipped wane, but our veneers are measured at the narrowest, as explained in the paragraph "sizes."
As a genuine natural wood, all finishing products are acceptable as long these products are meant to be for wood usage.
The choice of the finished product must be consistent with the final usage realization.
To keep the cost of these products as cheap as possible and contrary to other veneers on this website, the pictures of Small Size Veneers do not represent the available stock.
Please look at our TUTORIALS; you might find some valuable tips.
Please get in touch with us for any additional information by E-MAIL or phone.
Data sheet
You might also like
Genuine wood sliced-veneer sheets.
Single selected veneers, no sequence.
Fix length of 30 cm long.
Width: From 15 to 17 cm.
Thickness: 0.6 mm.
Sold by the sheet.
English
