- New
Rough-cut Oak Narrow-width Small-size Veneers
Rough-cut Oak Narrow-width Small-size Veneers
Genuine wood sliced-veneer sheets.
Selected single veneers, no sequence.
Fix length of 30 cm long.
Width: From 10 to 14 cm, depending on availability.
Thickness: 0.9 mm.
Sold by the sheet.
Warning: Carefully read the full description of these veneers.
Rough-cut Oak Narrow-width Small-size Veneers
Genuine wood sliced-veneer sheets.
Selected single veneers, no sequence.
Dimensions:
Fix length of 30 cm long.
Width: From 10 to 14 cm, depending on availability.
Thickness: 0.9 mm.
Sold by the sheet.
Measurement scaling:
The width is rounded to the covered centimeter, for example, 15.8 cm, giving 15 cm.
Photos:
To keep the cost of these products as cheap as possible and contrary to other veneers on this website, the pictures of small-size veneers do not represent the available stock.
What is Rough-cut Oak?
Rough-cut oak is an oak veneer with a surface that mimics the striated appearance of a freshly sawn solid wood plank. These irregular striations accentuate the rustic and rough-sawn character.
These veneers are mounted on a fleece back.
What are the common Names for this wood?
Oak, European white Oak, Common Oak, Pedunculate Oak.
What is the botanical name for this wood?
Quercus petraea and Quercus robur.
Where can we find European Oak in nature?
Generally, oak can be found throughout the Northern Hemisphere.
In France, the common oak and the pedunculate oak are the main species that make up the northern French oak forests. A sessile oak is more rarely found, but this remains anecdotal.
In southern France, the evergreen oak and the cork oak are emblematic.
How to Recognize European Oak Wood?
Oak is a wood with a hard texture and large pores. It is recognizable by its fine and discreet grain on the flat-sawn surface, but it is more present, even omnipresent, on the quarter-sawn surface.
Its raw color is generally a sandy blonde. However, it varies depending on the soil (siliceous or calcareous) and the type of plantation (high forest or coppice).
Among the different appearances of oak, the most iconic are:
Brown oak: Generally, brown is an upward coloration of the base of the oak when the tree becomes old, a bit like human hair that turns gray/white. Like some humans, certain trees become completely brown, sometimes even in early adulthood, except for the sapwood, which remains white.
Smoked oak: This is an oak whose tannin has been reacted to give it a color ranging from milky coffee brown to charcoal black.
Swamp oak: These are oaks that fell into a swamp several thousand years ago. They are generally discovered during agricultural earthworks.
These oaks are in the process of fossilization. They have a very particular charcoal gray hue, and of course, they are rare.
Flaky oak: The flake is the oak's medullary rays, in other words, its "skeleton." When you cut a plank or a veneer on the quarter, you find yourself parallel to the medullary rays, and as a result, the flake is obvious and creates special aesthetic patterns.
Other specialties are oak burl, oak crotch, and knoty oak... will complete this non-exhaustive list.
What are the mechanical properties of European Oak?
Weight: approximately 675 kg/m³ at 10-12% moisture content
Janka hardness: 4980 Newton, for comparison: ash is 6580 N and poplar is 1650 N
Elasticity: 10.60 Gigapascals, for comparison: US maple is 12.62 GPa and poplar is 9.75 GPa.
Tensile strength: 97 Megapascals; for comparison, US maple is 109 MPa, and poplar is 62 MPa.
What are the uses of Oak veneers?
Oak is a wood that combines strengths, like a decathlon athlete who is not the best in any discipline but is strong in several.
Thanks to its qualities, oak is used in many areas:
Construction: Oak is used to construct frames, floors, exterior joinery (doors, windows), and decorative elements (paneling, moldings).
Furniture: Oak is a highly prized wood for manufacturing quality furniture, such as tables, chairs, wardrobes and chests of drawers.
Flooring: Oak flooring is very resistant and aesthetic. It is often chosen for quality floors.
Cooperage: Oak is used to make aging barrels for wines and spirits.
Other uses: Oak is used to manufacture tools, decorative objects, and boats.
What are wood veneers?
Veneers are thin sheets of wood obtained by slicing or peeling.
Their surface has the appearance of planed wood without any finish or treatment. They are neither glued nor backed with any other material. This means that both faces of the sheets can be used.
Veneers are mainly used to cover less aesthetic substrates such as plywood or particleboard to make furniture or wall panels.
Wood veneers are also used to create decorative objects such as lamps, jewelry, bookmarks, and more.
By assembling several sheets of veneer on top of each other, it is possible to manufacture objects requiring high mechanical resistance, such as skis, bicycle frames, or musical instruments.
The applications of veneer are as varied as they are multiple.
Since veneers are genuine wood, all wood finishing products, whether varnish, stain, or oil, are suitable. The choice of finish will depend on your personal preferences and the final use of the object.
The veneer offered here is a sliced sheet of uniform thickness, but the thickness might differ from one species to another. The standard thickness is around 0.6 mm.
Although the edges of the veneers have been cut roughly straight, the cut is not perfectly parallel. Some veneers may retain the natural taper of the tree, being slightly wider at the foot than at the top.
Some veneers may have a trace of a waney edge (an edge following the tree's natural shape) on the sides. In this case, the dimensions indicated correspond to the minimum width of the veneer, as specified in the "Dimensions" paragraph.
How to use veneers?
How to cut the veneers?
Veneers can be easily cut with a utility knife.
For straight cuts, the best results are obtained with a veneer saw.
Use a fretsaw, scalpel, or veneer knife for curved cuts.
Always allow for a slightly larger veneer sheet than your intended surface. This will allow you to adjust the size after gluing for a clean finish.
A flush trimmer can also be used to trim the veneer after gluing.
When cutting with a utility knife or veneer knife, it is best to cut with the grain of the wood. To check this, run your finger along the edge of the sheet. The direction that feels smoothest is the ideal direction for cutting.
What is veneer splicing?
As the veneers have the width that nature gave us, you might need to cover an area wider than the veneers available.
Therefore, you need to splice the veneers by gluing or fixing them side by side with tape to obtain the desired width.
Trim the veneer's edges with a straight and smooth cut to realize good jointing.
Stick the veneers with tape (the blue one is a good choice.)
Usually, the veneers are spliced side by side, but to obtain a longer length, they can be done foot by foot.
The splicing must be done before gluing the veneers on the substrate.
What Glue to Use for Veneering?
Several types of gluing are possible.
Vinylic glue (PVA or PVB) is well adapted to porous substrates such as plywood, particle board, or MDF. The veneers must be pressed with clamps over the entire surface at once.
Note: A technique using vinylic glue and an iron can also be used to glue veneers, but we strongly recommend choosing this technique only if other gluing solutions are impossible.
- Neoprene glue is applied to all surfaces, especially non-porous surfaces, using two coats of glue and marouflage.
- Animal glue, such as hide, sinew, or bone glue, are pellets that must be cooked in a double boiler and used hot.
How to Sand Veneers?
Veneers and all our products are genuine wood and can be sanded according to thickness.
Please do not use a belt sander, regardless of the thickness of the veneer, as this could pierce it.
With a 0.6 mm veneer, lightly sand with 120 grit and then finish with 180 or 240 grit. With an orbital sander, 180 grit is already sufficient for most applications.
How to Finish a Veneer Realization?
All finishing products generally used for wood are suitable for finishing our products. For example, you can use a varnish, wax, paint, or oil.
However, ensure that the product you want to use is compatible with the final use of your creation.
More information:
Please look at our TUTORIALS; you might find some valuable tips.
Please get in touch with us by email or phone for any additional information.
Data sheet
- Species
- Oak
- Thickness group
- Thick thickness
- Width group
- Narrow width
- Grade
- Quarter-cut
You might also like